Dry Powder Ball Press Machine

Introduction of dry powder ball press machine

Dry Powder Ball Press Machine is also known as dry powder briquetting press machine, which can be used to suppress pulverized coal, iron powder, coking coal, aluminum, iron, tin oxide, carbon powder, coal powder, slag, gypsum, tailings, sludge, kaolin, activated carbon and other powder materials which contain low wate content or no water.

This kind of Dry dust ball press machine can press dry powder into briquette at one shot.

After being processed, the dry powder briquette can be used in transporting and construction area. High-pressure dry briquette machine is mainly used for high-density metal scrap (scrap iron, copper scrap, aluminum scrap, etc.), granular powder metal powder (iron powder, aluminum powder, copper powder, lead powder, etc.), metallurgical additives, sponge iron, etc. Without adding any binder pressed into the case of cylindrical cakes of high-density block.

What’s more, this High pressure dry briquette machine not need water and binding agent, dry powder granulation The Dry powder ball pressing machine can press a lot of materials for various shapes of briquettes. Outlet shapes can be round ball, pillow ball, oval ball, egg ball, etc., and also we can customize the shapes according to your requirement.

Features of dry powder ball press machine

1. Dry powder ball press machine realize the direct dry pelletizing process without follow-up drying treatment.

2. Dry powder ball press machine features low energy consumption, high efficiency, and low failure rate.

3. The products have high density, high strength, and high hardness.

4. The roller is made of hard materials with good wear resistance and long lifetime.

5. The end products shape of products can be all shapes

6. Comfortable silent running

Working principle of dry powder ball press machine

Dry powder briquetting machine transfers power to the two rollers through the speed reducer and the two pressure rollers will rotate in opposite directions.

When the two rollers are rotating, materials will move into the ball mold on rollers. With the rotation of rollers, the small pressure of materials will become big.

When the material is moving to the line contact point of rollers, the pressure has reached the peak. With the huge line pressure, the powder materials will be pressed into finished balls.

Technical data